Home
Videos uploaded by user “Dangar Marine”
Removing the rudder post
 
15:33
In this video my mate Jeff and I get the rudder post out of the steel trawler. This involves using a lot of heat, some penetrating oil and a lot of sledge hammer action. I also remove the bottom bearing to make it easier to slide out. To do this I jack the rudder post up enough to get at the bearing before driving it back down. Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts and other merchandise available at https://dangarmarine.com.au/collections/merchandise Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 66058 Dangar Marine
Prop shaft and fuel tank trouble
 
12:30
Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine In this video I start taking the prop shaft out but get stuck for the right tools to remove the flange from the gearbox end of the shaft. I also find an oil seal at the top of the rudder shaft and try to remove the bearing below it. Finally while cutting the rubbing strip from the chine diesel begins to run out of the hull. I then quickly drain that tank, open the inspection hatch and clean out the tank ready for welding. T-shirts and other merchandise available at https://dangarmarine.com.au/collections/merchandise Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 65142 Dangar Marine
Ultrasonic thickness testing the steel hull plates on the trawler
 
13:20
In this video I clean up the hull plates and then ultrasonic thickness test the thickness of the steel hull plates using a Checkline TI-25TLX https://www.checkline.com/wall_thickness_gauges/ti-25ltx Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts and other merchandise available at https://dangarmarine.com.au/collections/merchandise Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 53050 Dangar Marine
Removing the propeller shaft from the steel trawler
 
14:06
Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine In this video I clean the bilge out as best I can and remove the flange off the end of the propeller shaft. Once the key is out I can then slide the prop shaft itself out. The stuffing box / stern gland is a bit stuck but I eventually get it out along with the packing and studs. T-shirts and other merchandise available at https://dangarmarine.com.au/collections/merchandise Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 63978 Dangar Marine
Week one of working on the steel trawler
 
15:28
In this video I start cutting the rubbing strip off the chine as well as removing the rudder and attempting to remove the rudder post. Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts and other merchandise available at https://dangarmarine.com.au/collections/merchandise Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 82158 Dangar Marine
DIY wet blasting steel
 
14:17
In this video I set up a simple rig for wet blasting steel. I use a petrol pressure washer and a wet blasting quick fit attachment. I also try putting the garnet into a sand blasting kit and using an air compressor to force the media into the nozzle. The results it gives are impressive. Next step is to add some Chlor-Rid (http://www.chlor-rid.com/) into the water to help with rust issues once the steel has been blasted. Hold-Blast can also be used afterwards if the steel won't be primed for a day or two. Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts and other merchandise available at https://dangarmarine.com.au/collections/merchandise Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 51857 Dangar Marine
Broken spark plug extraction
 
01:52
In this video I show removing an old rusted spark plug where the porcelain section has snapped off completely. Tool used - https://store.snapon.com/Tapered-Bit-Extractors-Set-Extractor-Tapered-Bit-P635478.aspx T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! All music available at http://soundscloud.com/dangarstu
Views: 63784 Dangar Marine
On the hardstand for the first time
 
16:16
In this video I put the steel trawler up on the hardstand for the first time and finally get to see what condition it is in underneath. Unfortunately all the anodes are gone and there is some corrosion damage as a result but nothing that can't be fixed - somewhere else... This video is a part of a series of videos. View the others here https://www.youtube.com/playlist?list=PLJD0gZGZdCufGyRWHrcDp7StAO5COOEY4 Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts and other merchandise available at https://dangarmarine.com.au/collections/merchandise Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 128002 Dangar Marine
Continuing to get the steel trawler ready for sandblasting
 
14:58
In this video I remove some of the old paint, the seacocks, the cutlass bearing and the old sonar transducer mounting to get ready for sandblasting the hull. Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts and other merchandise available at https://dangarmarine.com.au/collections/merchandise Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 60991 Dangar Marine
How to splice an eye in a rope
 
12:22
In this video I show how to splice an eye into a three-strand rope. I have died the ends of the rope to hopefully make it easier to see. Splicing is relatively easy to learn but all those strands can make it easy to go cross eyed! Spliced eyes are great for making permanent loops in ropes or making a rope permanently attached to something such as a fire bucket or an anchor chain.
Views: 12129 Dangar Marine
Re-installing an outboard lower unit
 
04:48
In this video I show a few tips for re-installing an outboard lower unit or gearbox. This involves using a rachet strap to support the gearbox while you position the driveshaft, water pump pipe or hose and the gear selector. T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! All music available at http://soundscloud.com/dangarstu
Views: 168093 Dangar Marine
Unblocking a carburettor
 
04:21
In this video I show a quick trick for unblocking a carburettor jet in the field. This involves choking the carburettor at high revs to draw dirt and water out of the jets. Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 13430 Dangar Marine
Testing an outboard water pump
 
04:00
In this video I quickly go through how to testing the water pump in an outboard motor. The main tips are having the outboard deep enough in the water and making sure you are turning the drive shaft in the right direction for your outboard motor (most often clockwise) All music available at http://soundscloud.com/dangarstu All writing available at http://www.lulu.com/spotlight/dangarstu
Views: 349804 Dangar Marine
Preparing the trawler go on the hardstand
 
15:02
In this video I start getting ready for the boat to go onto the hard stand. This involves finding all the existing faults and gathering all the tools, supplies and information I am going to need on the day. This video is a part of a series of videos. View the others here https://www.youtube.com/playlist?list=PLJD0gZGZdCufGyRWHrcDp7StAO5COOEY4 Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts and other merchandise available at https://dangarmarine.com.au/collections/merchandise Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 97915 Dangar Marine
Lubricating stiff outboard throttle and gear control cables
 
08:22
In this video I show how to lubricate marine cables that are stiff or seized. This technique is great for lubricating throttle cables, gear shift cables and steering cables. Ideally it would be used as part of a preventative maintenance program but it can also be used to help free cables that are starting to seize from corrosion. The cables are common with a variety of inboard and outboard boat motors. The technique I show here involves using a simple compressor (or even a bike pump) to force oil down the entire length of the cable.
Views: 113198 Dangar Marine
Fixing an outboard speedometer
 
06:16
Most outboard speedometers stop working because the pitot tube in the gearbox gets blocked up with debris. It is a simple process of unblocking this tube with a drill bit to get the speedo working again. This is the same for almost all brands of outboard motors even though in this one we use a Yamaha outboard. The main symptom of this type of blockage is having the speedometer show zero knots (or miles per hour) even though you are travelling at speed. All music available at http://soundscloud.com/dangarstu All writing available at http://www.lulu.com/spotlight/dangarstu
Views: 91232 Dangar Marine
DIY hardstand props
 
12:24
In this video the boat gets launched and then lifted out again by a crane onto DIY boat stands made from acrow props. Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts and other merchandise available at https://dangarmarine.com.au/collections/merchandise Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 65916 Dangar Marine
How an outboard gearbox works
 
07:20
In this video we look at the inner workings of an outboard motor's gearbox. This includes the drive shaft, shift linkage, dog clutch, forward and reverse gears and the prop shaft. You'll see how the dog clutch moves to select forward, neutral and reverse as well as where the exhaust gases flows out behind the propellor.
Views: 870851 Dangar Marine
Outboard primer bulbs
 
05:24
In this video we look at why holding an outboard primer bulb vertically makes it work better. This is because gravity acts on the one-way ball valves helping them to close. T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! All music available at http://soundscloud.com/dangarstu
Views: 93924 Dangar Marine
Winterising an outboard motor
 
15:51
In this video we go through the basic process of winterising an outboard motor and boat, getting ready to leave it standing for the off season. This involves adding stabiliser to the fuel, draining the carburettors, putting the battery on charge and changing the oil. T-Shirts available from https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt All music available at http://soundscloud.com/dangarstu
Views: 36699 Dangar Marine
Trimming an outboard - Quick Tip
 
05:44
In this video I go through the basics of trimming an outboard to make a boat both plane an manoeuvre well on the water. Planning well requires the motor trimmed up, stopping and reversing requires the outboard trimmed right down. T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 36105 Dangar Marine
Cleaning an outboard tilt tube
 
03:50
In this quick tip video I show one way of cleaning the corrosion out of an outboard tilt tube. This can help to free up and outboard steering cable and making the steering much smoother an easier to turn. T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! All music available at http://soundscloud.com/dangarstu
Views: 27428 Dangar Marine
The Evinrude 150 returns!
 
03:56
This video is just a quick update on the return of the Evinrude 150HP that is due for a rebuild. All the parts are now here, just need to get on with it! T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! All music available at http://soundscloud.com/dangarstu
Views: 30948 Dangar Marine
Sydney Harbour in the Green Machine
 
08:40
In this video Dave, Eddie and I head to Sydney Harbour in the Green Machine. Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 9270 Dangar Marine
Repairing a damaged bolt thread
 
11:14
In this video I show using a Time-Sert thread repair kit to repair a damaged bolt thread. Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts and other merchandise available at https://dangarmarine.com.au/collections/merchandise Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 12157 Dangar Marine
Two stroke carburettor synchronisation
 
13:04
In this video I synchronise the carburettors on the Yamaha 20HP outboard. This involves getting the throttle butterfly valves to be set evenly at idle and fully open at full throttle. T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 32379 Dangar Marine
Evinrude 150 run-in period
 
08:49
In this video we take the Evinrude 150 out for its first run on the river and being the process of following the rebuild run-in procedure. We also drink beer and go fishing. T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! All music available at http://soundscloud.com/dangarstu
Views: 74996 Dangar Marine
Removing the Detroit Diesel from the steel trawler
 
24:47
Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine In this video I disconnect the Detroit Diesel 4-71 and lift it out of the boat. This will give me excellent access to the hull below, the prop shaft and the engine itself to service it. T-shirts and other merchandise available at https://dangarmarine.com.au/collections/merchandise Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 110593 Dangar Marine
Victa 125 teardown
 
09:41
In this video I teardown the Victa 125 engine. This involves separating the crankcase, removing the oil seals and pressing the bearings off the crankshaft. Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts and other merchandise available at https://dangarmarine.com.au/collections/merchandise Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 11464 Dangar Marine
Diagnosing and fixing stiff boat steering
 
17:13
In this video we look at a boat with stiff push-pull cable steering on the outboard. We start by separating the parts of the steering to determine where the resistance is coming from then go on to clean the steering rod and tilt tube of old dried grease. Other related videos are; Replacing the steering cable: https://www.youtube.com/watch?v=VJ8UruO-_a0 Unseizing a pivot tube: https://www.youtube.com/watch?v=dJpw9IJ9H1U All music available at http://soundscloud.com/dangarstu All writing available at http://www.lulu.com/spotlight/dangarstu
Views: 217187 Dangar Marine
Outboard reed valves
 
10:28
In this video I take the reed valves out of the Yamaha 20HP 2-stroke to see if they are damaged and causing a lean condition. T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 65658 Dangar Marine
Buying a used boat
 
16:12
In this video Paul and I head out to look at a second hand boat he is thinking of buying. It focuses on the things to check on the outboard and the hull as well as the on water test. It also talks a bit about things to think of when choosing the boat you want to buy. Receipt template: https://docs.google.com/document/d/1rwbeDYCcXXRPoSkm0BngqVhnDHYnUk8sdMNsanT4QdU/edit?usp=sharing Inspection checklist: https://docs.google.com/document/d/1oV-qlhvvXZJyfhi_IF0LGqjfbTsUN2x-OMiV68D_9is/edit?usp=sharing Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 37779 Dangar Marine
Wiring the electrics on a boat [Pt 1]
 
17:07
In this video I begin the process of replacing the wiring in my boat, Green Machine. Having removed all the old wiring, I start by running a fused cable from the battery in the stern to a couple of bus bars under the dash. All the devices will then be wired to the terminal blocks to keep the wiring neat and cables as short as possible. All music available at http://soundscloud.com/dangarstu All writing available at http://www.lulu.com/spotlight/dangarstu
Views: 98023 Dangar Marine
Pressure testing an outboard gearbox
 
09:24
In this video I put together a simple tool for pressure testing outboard gear boxes. This is done to test the lower unit seals around the prop shaft, drive shaft and gear selector. Parts used are: https://www.ebay.com.au/itm/142414466394 and http://www.marineengine.com/products/accessories.php?g=524&s=SIERRA+QUART+OIL+PUMP T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 23432 Dangar Marine
Using a timing light to set outboard ignition
 
10:05
In this video I use a timing light to set the idle timing on a Yamaha 20 HP two stroke outboard motor. T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 42403 Dangar Marine
Making your own battery leads
 
16:45
In this video I go through a series of three viewer tips for making battery leads. These include making your own lugs, using a hydraulic crimper and using dual walled heat shrink. Crimper tool http://www.ebay.com.au/itm/8-Ton-Hydraulic-Wire-Force-Terminal-Crimper-Cable-Crimping-Tool-9-Dies-4-70mm/391693130659 T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 11184 Dangar Marine
Launching the Green Machine!
 
12:12
Finally the Green Machine goes back into the water! In this video I give a quick run down on the work that was done as well as a look at what still needs to be done. I also take it for a run up the river to see what its top speed is with the new Honda BF40 compared to the old Yamaha F50. All music available at http://soundscloud.com/dangarstu All writing available at http://www.lulu.com/spotlight/dangarstu
Views: 48982 Dangar Marine
Starting the Evinrude 150 for the first time
 
09:10
T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt In this video I finally get to start the Evinrude 150 for the first time after its rebuild. There is a bit of a problem with a leaking carburettor boat to start with, but once that is sorted out it fires up without too much trouble. Post photos of you wearing your shirt to @dangarstu on Instagram! All music available at http://soundscloud.com/dangarstu
Views: 130207 Dangar Marine
Installing a solar cell in a boat
 
12:43
In this video I install a solar cell and a charge controller in my boat. This is a follow on from part one where I install the VSR https://youtu.be/kTQp5d5mMio Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 16418 Dangar Marine
Changing the oil in a four stroke outboard
 
11:03
In this video I change the sump oil and oil filter in my Honda BF40 four stroke outboard motor. Before I drain the oil I also run an oil / engine flush through it. Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine Valve adjustment video - https://www.youtube.com/watch?v=aVBWNAhs3XU Timing belt video - https://www.youtube.com/watch?v=o9tau2K3ej8 T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 13092 Dangar Marine
Making a running line for anchoring a boat
 
11:21
In this video Paul and I make a running line for anchoring a boat in shallow or tidal water. Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 50907 Dangar Marine
When to give up on an outboard motor
 
15:02
This video is about when to give up on an old outboard and just replace it. Eventually an outboard will just be too far gone and fixing it is no longer a good option. In this step of the Green Machine restoration project I remove the old motor from the hull in order to get ready for the new one arriving. Removing an outboard from a boat involves removing the wiring loom, the control cables, the steering cable and the four bolts that secure it to the transom. I then use a standard engine crane to lift it off the back of the boat and put it onto a wooden outboard stand. All music available at http://soundscloud.com/dangarstu All writing available at http://www.lulu.com/spotlight/dangarstu
Views: 200090 Dangar Marine
Making a paper carburettor gasket
 
06:43
This video shows how to make a paper gasket using oil to make an imprint on the object the gasket is for. I then use wad punches to cut out the bolt holes and make rounded inside corners. T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! All music available at http://soundscloud.com/dangarstu
Views: 19625 Dangar Marine
Evinrude 150 autopsy
 
15:13
On it's maiden voyage, the Evinrude 150HP outboard died. In fact in the first ten minutes. In this video I begin the process of diagnosing the problem, eventually stripping the motor right down to the crankshaft. One of the pistons is badly melted and others are scored. The big end bearings seem to have survived without breaking up, but the main bearings don't seem so healthy. Off to the machine shop for this engine to get rebored and some new forged pistons. All music available at http://soundscloud.com/dangarstu All writing available at http://www.lulu.com/spotlight/dangarstu
Views: 142534 Dangar Marine
Johnson / Evinrude primer solenoid
 
12:58
In this video I test a Johnson / Evinrude prime solenoid and then install a repair kit. This involves an electrical test of the solenoid and a pressure test of the valve seal. Service kit used in video http://www.marineengine.com/newparts/part_details.php?pnum=SIE18-7044 T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 85780 Dangar Marine
Never move to an island!
 
15:17
In this video Paul, Dave and I rescue a small tinnie that had sunk at the public wharf on Dangar Island. Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 175559 Dangar Marine
Making a plywood transom
 
10:18
In this video I laminate two pieces of plywood together to make the transom for my boat. Become a Patron of Dangar Marine at https://www.patreon.com/dangarmarine T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 18130 Dangar Marine
Mounting an outboard motor
 
16:03
In this video Paul and I throw the Honda BF40 onto the transom of the Green Machine. We also then connect up the forward controls and give it another test start. All music available at http://soundscloud.com/dangarstu All writing available at http://www.lulu.com/spotlight/dangarstu
Views: 100013 Dangar Marine
Dangar Island and the Hawkesbury River
 
22:16
In this video I take a trip around Dangar Island by boat. I also take a short walk up to The Tanks, a nearby waterfall. We also head out to Gunyah Beach, West Head, Broken Bay and Lion Island. T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store. All music available at http://soundscloud.com/dangarstu
Views: 32941 Dangar Marine
Slipped flywheel no start
 
05:23
In this video I look at an outboard that wouldn't start because the woodruff key on the flywheel had sheared allowing the flywheel to rotate on the crankshaft and therefore throwing the ignition timing right out. T-shirts available at https://dangarmarine.com.au/collections/merchandise/products/dangar-marine-t-shirt Post photos of you wearing your shirt to @dangarstu on Instagram! All music available at http://soundscloud.com/dangarstu
Views: 21323 Dangar Marine